Self Drilling - Roofix Fasteners

Self Drilling Screws

Drills upto 4.5mm of steel purlin thickness
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Hex Flange head with DEKS True Blue EPDM washer or Metal Bonded EPDM Washer
Thickness (Gauge) – 12G
Thread per Inch (TPI) – 14TPI
Length available – 25 mm to 135 mm
Drilling Capacity – Steel of thickness upto 4.5mm
Recommended Drill Machine – Makita FS2700 or Equivalent Drill machine of max 2500 rpm
Application – 12G – 14 TPI Hex Flange Washer Head – Designed for metal-to-metal fixing, which is used for fastening of metal roofing sheets to structural steel. The fixing can be done in Wall/Cladding /Valley Fixing. Structural Steels could be a Cold Rolled Steel (i.e Z/C Purlins, Square Pipes with thickness not more than 4.5 mm)

Drills upto 8mm of purlin thickness
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Hex Flange head with DEKS True Blue EPDM washer or Metal Bonded EPDM Washer
Thickness (Gauge) – 12G
Thread per Inch (TPI) – 14TPI
Length available – 30 mm to 90 mm
Drilling Capacity – Steel of thickness upto 8 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500 rpm
Application – 12G – 14 TPI Hex Flange Washer Head – Designed for metal-to-metal fixing, which is used for fastening of metal roofing sheets to structural steel. The fixing can be done in Wall/Cladding /Valley Fixing. Structural Steels of thickness not more than 8 mm

Drills upto 12mm of purlin thickness
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Hex Flange head with DEKS True Blue EPDM washer or Metal Bonded EPDM Washer
Thickness (Gauge) – 12G
Thread per Inch (TPI) – 24TPI
Length available – 32 mm to 130 mm
Drilling Capacity – Steel of thickness upto 12 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – 12G – 24 TPI Hex Flange Washer Head – Designed for metal-to-metal fixing, which is used for fastening of metal roofing sheets to structural steel. The fixing can be done in Wall/Cladding /Valley Fixing. Structural Steels could be a Hot Rolled Steel (i.e I beam Purlins, C Channel with thickness not more than 12mm)

Stitching Screw
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Hex Flange head with DEKS True Blue EPDM washer or Metal Bonded EPDM Washer
Thickness (Gauge) – 10G
Thread per Inch (TPI) – 16TPI
Length available – 16 mm to 25 mm
Drilling Capacity – Steel of thickness 0.75 mm – 4.5 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – Roofix 10G – 16 TPI Hex Flange Washer Head – Designed for Stitching Application, which includes fixing of metal roofing sheets together, and to steel purlins.

Wafer Head Screws
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Wafer head
Thickness (Gauge) – 10G / 12G
Thread per Inch (TPI) – 24TPI
Length available – 25 mm to 32 mm
Drilling Capacity – Steel of thickness 2.5 mm – 12 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – Roofix 10G – 24 TPI Wafer Head – Designed for fixing of clips to the secondary substrate. The clips hold the roof.

CSK Head Screws
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Countersunk (CSK) head
Thickness (Gauge) – 8G
Thread per Inch (TPI) – 18TPI
Length available – 25 mm to 40 mm
Drilling Capacity – Steel of thickness 2 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – Roofix 8G – 18TPI Countersunk Head – Fastening for fixing fibre cement, calcium silicate, gypsum & bison boards to steel purlin. For direct fastening of different boards to steel purlin.

Polycarbonate Screws
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Hex Flange Head with 26mm Polycarbonate EPDM washer
Thickness (Metric) – M6.5
Length available – 50 mm to 70 mm
Drilling Capacity – Steel of thickness 5 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – Roofix Self drilling fasteners are used for polycarbonate sheet fixing
• Pre drills and self centers during installation.
• Unique wing design cuts its own thermal expansion hole.
• Modified drill point allows application into both timber and steel.
• Save 50% on installation time

Fiber Cement Sheet
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Wafer head
Thickness (Gauge) – 14G
Thread per Inch (TPI) – 14TPI
Length available – 110 mm
Drilling Capacity – Steel of thickness – 12 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – Roofix 14G – 14 TPI for direct fastening of fibre cement sheet to steel.

Wood Screws
Material And Coating – Case hardened carbon steel AISI 1022 with Multi-Layer Rust Shield Coating, Tested in accordance to AS3566-2002 Class 3.
Head And Washer – Hex Flange head
Thickness (Gauge) – 14G
Length available – 32 mm to 58 mm
Recommended Drill Machine – Makita FS2700, Drill machine of max 2500rpm
Application – Roofix Self drilling fasteners for fastening metal sheets to woods